Follow manufacturer’s washing machine instructions.
Generally the procedure is:
Unpack your machine
Check for damage
If damaged, do not install, and contact your supplier
Remove the protective screws from the back
Put plastic plugs in their place
Keep screws safe for later
Place your new machine where you want it
Close to a tap and water outlet, as well as a power source
Adjust the washing machine’s feet to the floor
No more than a 2°angle
Attach water inlet hose to tap
Screw onto the cold water inlet on the machine
Connect the drain hose to a draining duct or under sink tap
Make sure to remove any blanks from the hose first
The drain hose should be raised 15cm from the ground
Connect to the power
Be sure to check the plug and socket are compatible
Related articles
How to remove blood stains from clothing
Blood is a tough stain, especially if it is not treated while the stain is still fresh. So to remove it effectively, it needs to be pre-treated.
How to effectively measure the correct dosage for your wash
Ever seen white residues on your clothes after washing and thought... “I’ve used too much laundry detergent in that load!” Well, not necessarily!
How to fix your favourite garments
Nobody’s perfect. Rips, snags and stains happen to even the most fastidious on a daily basis. And there is nothing more embarrassing than ripping the seat of your pants or finding a big run in your stockings in public—especially during an important moment of your life!
